• Register
  • Log In

  • Mi carrito - 0

    You have no items in your shopping cart.
Ingles
Español Ingles
Catalogo Virtual
Ingles
Español Ingles
  • Register
  • Log In

  • Mi carrito - 0

    You have no items in your shopping cart.
Nosotros
Filtros
Category
  1. Crimpers (26)
  2. Shears (11)
  3. Cutters and wire strippers (22)
  4. Punch drivers (1)
  5. Pliers (8)
  6. Screwdriver (16)
  7. Hex key set (1)
  8. Wire grips (19)
  9. Hot sticks (14)
  10. Cable puller (1)
  11. Tensioning tools (1)
  12. Stainless steel bands (1)
  13. Stainless steel buckles (1)
  14. Lineman's ratcheting box wrench (1)
  15. Insulated tool kit (1)
  16. Pocket tool pouch (1)
  17. Electrician's tool belt (1)
  18. Protection gloves (1)
  19. Lockouts with interlocking tabs (1)
  20. Wide steel fish tape (1)
  21. Hacksaw (1)
Cable lenght
  1. 91cm (126)
  2. 1.82 m (6 ft.) (1)
Type
  1. Permanent slot (1)
  2. Ratchet (9)
  3. Moveable and rotating dies (2)
  4. Manual compression (6)
  5. Push down (2)
  6. Manual (23)
  7. Automatic (2)
  8. Diagonal cutting (2)
  9. Rotation (1)
  10. Flat tip (1)
  11. Cabinet tip (5)
  12. Phillips tip (2)
  13. Cabinet tip / Phillips tip (1)
  14. Grip for bare cables (3)
  15. Parallel jaw grip (2)
  16. Grip for PVC-covered conductors (1)
  17. Grip for Bare Wire (1)
  18. Grip for high strength cables (1)
  19. Haven's Grip (2)
  20. Universal (1)
  21. Shotgun (4)
  22. Telescoping (2)
  23. Standard (3)
  24. Varied (1)
  25. Folding set (1)
  26. Fluorescent (1)
  27. N/A (19)
Insulation class
  1. Up to 1000 V (10)
  2. N/A (6)
Model
  1. SCC-60 (1)
  2. SCC-200 (1)
  3. CC-250 (1)
  4. CC-400LT (1)
  5. RCC-500PH (1)
  6. 10-465 (1)
  7. 10-667 (1)
  8. 10-965 (1)
  9. 63607 (1)
  10. 63800ACSR (1)
  11. 63700 (1)
  12. 63041 (1)
  13. 63060 (1)
  14. S-216 (1)
  15. S-220 (1)
  16. S-225 (1)
  17. S-230 (1)
  18. S-235 (1)
  19. HV-220 (1)
  20. HV-225 (1)
  21. HV-230 (1)
  22. HV-235 (1)
  23. HV-240 (1)
  24. 8104 (1)
  25. 8106 (1)
  26. 8108 (1)
  27. 8110 (1)
  28. 567-12 (1)
  29. 6702 (1)
  30. P10431 (1)
  31. A10400 (1)
  32. A11000 (1)
  33. 10-090 (1)
  34. 10-093 (1)
  35. 10-170 (1)
  36. 10-188 (1)
  37. 10-197 (1)
  38. 10-337 (1)
  39. 6799 (1)
Tip type
  1. Diagonal (1)
  2. Tweezers (1)
  3. Universal (3)
  4. Rounded (New England) (3)
Lenght
  1. 184 mm (1)
  2. 219 mm (1)
  3. 223 mm (2)
  4. 246 mm (2)
  5. 226 mm (1)
  6. 310mm (1)
  7. 25" (1)
  8. 24" (1)
  9. 36" (1)
  10. 600mm (2)
  11. 700mm (1)
  12. 349mm (1)
  13. 914mm (1)
  14. 260mm (2)
  15. 648mm (1)
  16. 350mm (1)
  17. 165 mm (1)
  18. 235 mm (1)
  19. 125 mm (1)
  20. 155 mm (2)
  21. 136 mm (2)
  22. 170 mm (1)
  23. 133 mm (2)
  24. 127 mm (1)
  25. 197 mm (2)
  26. 210 mm (3)
  27. 181 mm (1)
  28. 168 mm (1)
  29. 222 mm (1)
  30. 203 mm (1)
  31. 146 mm (1)
  32. 1,38m(4'6") (1)
  33. 2m(6'6") (1)
  34. 2,26m(8'6") (1)
  35. 3m(10'6") (1)
  36. 3,6m(12'6") (1)
  37. 230 mm (1)
  38. 221 mm (1)
  39. N/A (2)
Jaw dimensions
  1. H25 x W25 x L13 mm (1)
  2. H45 x W26 x L14 mm (3)
  3. H41 x W33 x L16 mm (3)
  4. H59 x W25 x L13 mm (1)
Terminal type
  1. Insulated / Non-insulated / Open barrel (1)
  2. Parallel slot "O" "D3" / "C" "H" (1)
  3. Parallel slot "BG (5/8)" "D3" /"C" "H" (1)
  4. Non-insulated (12)
  5. Insulated (1)
  6. Insulated / Non-insulated (1)
  7. Non-insulated open barrel (1)
  8. Cord insulated end (2)
  9. Voice / data (3)
  10. Voice / data / video (2)
Connector type
  1. RJ12 / RJ45 (1)
  2. RJ11 / RJ12 / RJ45 (1)
  3. RJ45 (66 - 88 - 110) (1)
  4. RJ45 (66 - 110) (1)
  5. Mini-coax / BNC - F - RCA (1)
  6. N/A (10)
Range caliber AWG
  1. 20 to 10 AWG (1)
  2. 22 to 6 AWG (1)
  3. 6 AWG to 750 MCM (1)
  4. 12 to 4 AWG (1)
  5. 12 to 1/0 AWG (2)
  6. 4 AWG a 300 MCM (2)
  7. 12 to 4/0 AWG (1)
  8. 22 to 10 AWG (3)
  9. 22 to 8 AWG (1)
  10. 28 to 10 AWG (1)
  11. N/A (6)
  12. 4 AWG to 600 MCM (1)
  13. 6 AWG to 800 MCM (2)
  14. 8 AWG to 500 MCM (1)
  15. 8 AWG to 750 MCM (1)
  16. 8 AWG to 600 MCM (1)
  17. 8 AWG to 250 MCM (1)
  18. 12 AWG to 2/0 AWG (1)
Drilling range
  1. From 22,5mm (7/8") to 61,5 mm (2 7/16") (124)
Cut type
  1. Clipper Cut (1)
  2. Center Cut (2)
  3. N/A (8)
Drilling material
  1. 10 Gauge Mild Steel (1)
  2. 14 Gauge Mild Steel (123)
Max. Caliber steel wire
  1. ø7/32" (1)
  2. ø9/32" (1)
  3. ø11/32" (1)
  4. N/A (8)
Max. Caliber steel bar
  1. ø1/4" (1)
  2. ø5/16" (1)
  3. ø15/32" (1)
  4. N/A (8)
Max. Caliber steel cable
  1. ø5/16" (1)
  2. ø3/8" (1)
  3. ø1/4" (1)
  4. Max.9mm (1)
  5. Max.3mm (1)
  6. N/A (7)
Max. Caliber welding cable
  1. ø35 mm (1)
  2. N/A (10)
Max. Caliber Acsr cable
  1. 336 MCM (1)
  2. 750 MCM (1)
  3. 477MCM (1)
  4. N/A (8)
Max. Caliber alumimum cable
  1. 500MCM (1)
  2. 800MCM (1)
  3. 750 MCM (3)
  4. 600 MCM (1)
  5. 1000 MCM (1)
  6. N/A (5)
Max. caliber communication Cable
  1. 28mm (1)
  2. N/A (10)
Max. Caliber common guy strand
  1. 13mm (1)
  2. 11mm (1)
  3. N/A (9)
Max. Caliber telephone cable
  1. 2700Pares (1)
  2. N/A (10)
Max. caliber copper cable
  1. 300MCM (1)
  2. 1/0AWG (1)
  3. 600MCM (1)
  4. 400MCM (1)
  5. 750MCM (1)
  6. 500MCM (2)
  7. 800MCM (2)
  8. N/A (4)
Max. Cut reinforcement steel
  1. ø5/8" (1)
  2. ø5/16" (1)
  3. ø3/8" (1)
  4. N/A (8)
Max. Caliber steel cable/Reinforcement
  1. N/A (11)
Copper and aluminum range
  1. 10 to 24 AWG (1)
  2. 10/12/ 14/ 16/ 20/ 22 AWG (1)
  3. 10/ 12/ 14/ 16/ 20 AWG (1)
  4. 14 to 500 MCM (1)
  5. 25 mm² - 4 AWG (1)
  6. 60 mm² - 1/0 (1)
  7. 13 mm² (1)
  8. N/A (4)
Coaxial range
  1. RG59/ RG6 / 6Q/ RG7/ RG11 (1)
  2. N/A (4)
Type of cable
  1. Coax cable (1)
  2. ACSR (4)
  3. Stranded (3)
  4. Bare copper/ wheelbarrow / metallic (1)
  5. ACSR/ AL and bare copper (3)
  6. Covered/ bare copper/ guy wire (1)
  7. CU/ guy wire/ steel rod/ barbed wire (1)
  8. Copper/ ACSR/ AAC (2)
  9. ACSR/ AAC (1)
  10. Copper (1)
  11. Copper/ steel (1)
  12. Aircraft / EHS / messenger / guy strand (1)
  13. Messenger / guy strand (2)
  14. N/A (3)
Cable Stranded range
  1. 10-20 AWG (1)
  2. 14 - 28 AWG (1)
  3. 12 - 22 AWG (1)
  4. 6-12 AWG (1)
  5. 10-18 AWG (1)
  6. 10-22 AWG (2)
Blade material
  1. Steel (1)
  2. 1095 Steel (1)
Crimper type
  1. Push down (1)
Accessory
  1. Blade for terminal 66 (1)
  2. Blade for terminal 110 (1)
Blade Finish
  1. Nickel-Plated (1)
Blade Length
  1. 762 mm (1)
  2. 480 mm and 640 mm (1)
  3. 480 mm (1)
  4. 60mm (1)
Screw Shearing
  1. 6-32 and 8-32 (3)
  2. 4-40 / 5-40 / 6-32 / 8-32 / 10-32 / 10-24 (1)
  3. N/A (3)
Cable solid range
  1. 12 - 26 AWG (1)
  2. 8-18 AWG (1)
  3. 8-20 AWG  (1)
  4. 10 - 20 AWG (2)
  5. N/A (2)
Clamp type
  1. "C" Open (5)
  2. Close (4)
Output force
  1. 16 Ton (1)
  2. 14.3 Ton (1)
  3. 13 Ton (2)
  4. 12 Ton (2)
  5. 8 Ton (1)
  6. 6.4 Ton (2)
Presentation
  1. Screwdriver set (2)
  2. Screwdriver unit (7)
  3. Multi-bit Screwdriver (3)
  4. Bits set (3)
  5. 8 in 1 screwdriver set (1)
Tip size
  1. 1/4" (3)
  2. 3/32" (1)
  3. 5/16" (1)
  4. 3/16" (1)
  5. No.1 (1)
  6. No.2 (2)
  7. No.3 (1)
  8. 1/4" / No.2 (1)
  9. 1/8" (2)
  10. Varied (1)
  11. N/A (7)
Shank length
  1. 3" (76 mm) (3)
  2. 4" (102 mm) (7)
  3. 6" (152 mm) (2)
  4. 7" (178 mm) (3)
  5. 2" (53mm) (1)
  6. N/A (5)
Total length
  1. 11.31" (287 mm) (1)
  2. 6.7" (171 mm) (1)
  3. 6.75" (172 mm) (1)
  4. 8.3" (211 mm) (5)
  5. 10.7" (273 mm) (1)
  6. 11" (279 mm) (1)
  7. 12.3" (314 mm) (1)
  8. 6.6" (169 mm) (1)
  9. 7.7" (197 mm) (6)
  10. 10.3" (263 mm) (1)
  11. 11.2" (286 mm) (1)
  12. 9" (229 mm) (1)
  13. N/A (4)
Number of screwdrivers
  1. 6 (1)
  2. 7 (1)
  3. 1 (3)
  4. N/A (6)
Function
  1. Screw holding (1)
  2. Standard (3)
  3. Wire bending (1)
  4. Ratchet (2)
  5. N/A (3)
  6. Pull - cuts (1)
Multi-bit
  1. 10 in 1 (2)
  2. 4 in 1 (1)
  3. N/A (7)
Bits type
  1. Standard (1)
  2. Specials (1)
  3. Push down (1)
  4. N/A (7)
Use
  1. Overthead and underground lines (1)
  2. Prune branches (1)
  3. N/A (5)
Maximum capacity
  1. 1,8 TON (1)
  2. 1 TON (2)
  3. 350 kgf (1)
  4. 2 TON (4)
  5. 3 TON (1)
  6. 2041 kg (3)
  7. 3629 kg (2)
  8. 2268 kg (2)
  9. 4536 kg (1)
  10. 680 kg (1)
  11. 1134 kg (1)
Jaw type
  1. Round (4)
  2. Round - Serrated (1)
  3. Round - Serpentine (1)
  4. Single V (1)
  5. Double V (1)
  6. Aggressive (2)
  7. N/A (9)
Jaw length
  1. 180 mm (1)
  2. 160 mm (1)
  3. 80 mm (1)
  4. 90 mm (3)
  5. 120 mm (2)
  6. 50 mm (1)
  7. 102 mm (2)
  8. 121 mm (1)
  9. 127 mm (1)
  10. 145 mm (2)
  11. 76 mm (1)
  12. 106 mm (1)
  13. 165 mm (1)
  14. N/A (1)
Loading capacity
  1. 2 Ton (1)
Cable diameter
  1. 4.76 mm (3/16") (1)
Number of sections
  1. 1 (1)
  2. 4 (1)
  3. 5 (2)
  4. 6 (2)
  5. 7 (2)
  6. 8 (2)
  7. 9 (1)
  8. N/A (4)
Extended lenght
  1. 10,68(35') (2)
  2. 9,15m(30') (2)
  3. 7,78m(25'6") (2)
  4. 6,10m(20') (1)
  5. 4,88m(16') (1)
  6. 6,41m(21') (1)
  7. 12,05m(39'6") (1)
  8. N/A (5)
Retracted length
  1. 1,42m(56") (1)
  2. 1,47m(58") (1)
  3. 1,52m(60") (1)
  4. 1,55m(61' 1/5") (1)
  5. 1,56m(61' 5/8") (1)
  6. 1,57m(62") (1)
  7. 1,63m(64") (1)
  8. 1,68m(66") (1)
  9. 1,73m(68") (1)
  10. 1,75(m69") (1)
  11. N/A (5)
Diameter base
  1. 41,3mm (1)
  2. 47,6mm (1)
  3. 55,6mm (1)
  4. 60,3mm (1)
  5. 68,3mm (1)
  6. 44,5mm (1)
  7. 48,5mm (1)
  8. 52,6mm (1)
  9. 31,75mm(1' 1/4") (1)
  10. 56,4mm (1)
  11. 60,5mm (1)
  12. N/A (4)
Operating Rod
  1. External (4)
  2. N/A (3)
Band width
  1. 3/8" to 3/4" (1)
  2. 3/8" (9.52 mm) (1)
  3. 3/4" (19.0 mm) (1)
Stainless steel type
  1. AISI 304 (1)
  2. AISI 201 (1)
Packing unit
  1. 100 units (1)
Packing
  1. Carton box (1)
Socket size
  1. 9/16" (14.3mm) and 3/4" (19.1 mm) (1)
Insulation
  1. Insulated up to 1000 V (1)
Insulation
  1. Insulated tools up to 1000 V (1)
Number of tools
  1. 8 (1)
Numbers of pockets
  1. 4 (1)
  2. 5 (1)
  3. 18 (1)
Size belt
  1. 2" (51mm) (1)
  2. 2-1/4" (57mm) (1)
  3. 1-1/2" (38 mm) (1)
Measurement range
  1. 40KV-240KV using additional resistors (1)
  2. N/A (6)
Length
  1. Medium: from 32" to 40" (813 to 1016 mm) (1)
  2. Large: from 38" to 46" (965 to 1168 mm) (1)
Size
  1. M (1)
  2. L (1)
Padlock holes
  1. 6 (1)
Diameter hasp
  1. 1" (25 mm) (1)
  2. 1-1/2" (38 mm) (1)
Fish tapes width
  1. 1/8" (3 mm) (1)
Fish tapes length
  1. 65 ft. (19 m) (1)
Blade tension
  1. Adjustable (1)
Blade length
  1. 12" (305 mm) (1)
Number of keys
  1. 11 (1)
Type of keys
  1. Hex (1)
Brand
  1. EBCHQ (13)
  2. First-forever (7)
  3. Hastings (17)
  4. Hi-Tool (9)
  5. Klein-Tools (64)
  6. Kudos (19)
  7. Maasdam (1)
Series
  1. 12098EINS (1)
  2. D220-7-INS (1)
  3. FF (1)
  4. HZ (1)
  5. K11095 (1)
  6. 12098 (1)
  7. 12098-INS (1)
  8. D213-9NE-INS (2)
  9. D213-9NE-CR-INS (1)
  10. D203-8-INS (1)
  11. HD (7)
  12. CE (1)
  13. JY (1)
  14. HSC (1)
  15. RJ (1)
  16. ASA (1)
  17. VDV427 (1)
  18. VDV211 (1)
  19. CC (3)
  20. RCC (1)
  21. SYK-8B (1)
  22. 10-465 (1)
  23. SCC (1)
  24. FF-2052 (1)
  25. D228-8-INS (1)
  26. WS-108 (1)
  27. WSC-1022 (1)
  28. TP -700B (1)
  29. RCS-0425 (1)
  30. VDV110-095 (1)
  31. 10 (3)
  32. 11 (1)
  33. 11063W (1)
  34. 63607 (1)
  35. 10-667 (1)
  36. 10-965 (1)
  37. 1570-3 (1)
  38. 1016 (1)
  39. 63800ACSR (1)
  40. 2100-5 (1)
  41. 63700 (1)
  42. 63041 (1)
  43. FC-1620 (1)
  44. 63060 (1)
  45. HH (1)
  46. UC (2)
  47. CYO (1)
  48. YQK (2)
  49. UB (1)
  50. YYQ (1)
  51. 1571-INS (1)
  52. ABC (3)
  53. 20KN-W-GRIP (1)
  54. AL (3)
  55. MIGHTY20-GRIP (1)
  56. NEW-SD-GRIP (1)
  57. 1656 (3)
  58. 1659 (1)
  59. 1613 (2)
  60. 1604 (2)
  61. S262 (1)
  62. HJ (1)
  63. KT (3)
  64. 33529 (1)
  65. 51 (1)
  66. 57 (1)
  67. 52 (1)
  68. 402 (1)
  69. 452 (1)
  70. 560 (1)
  71. 702 (1)
  72. 2005N (1)
  73. 70550 (1)
  74. 2000-48EINS (1)
Accessory type
  1. HMI/PLC/PC Cable OP - XMP - XP2 series (75)
  2. Dies of 1/2" ,3/4" , 1", 1 1/4", 1 1/2", 2" (1)
  3. Digital Voltage Phase Meter (1)
  4. Universal disconnect hook (2)
  5. Universal pruning saw (1)
  6. Six pack cleaning kit (1)
  7. Cleaning garment (1)
  8. Terminal wax (1)
  9. Box of 20 ultra fine non metalic pads (1)
  10. Box of 50 wipes per (1)
  11. Cleaning brushes kit (1)
  12. Insulation tester (1)
Mounting type
  1. Blade mounting straight or 45 ° (1)
Manufacturer material
  1. Induction hardened steel (8)
  2. Ast Alloy Chassis with Heavy (1)
  3. Steel (5)
  4. Leather (2)
  5. Nylon (1)
  6. Synthetic leather - thermo plastic rubber (1)
  7. Tempered steel (1)
  8. Polypropylene case - Fish tapes stainless steel (1)
  9. N/A (3)
Shape
  1. Circular (6)
  2. Triangular (1)
klein-tools_D220-7-INS_a.jpg

Alicate serie D220-7-INS

D220-7-INS series pliers

Certifications:

In stock










Tip typeDiagonal
MaterialInduction hardened steel
InsulationUp to 1000 V
Cutting styleDiagonal
ApplicationACSR cables, screws, nails and highly reinforced wires
Special featuresIt has standard double-layer insulation; high-lever design, with a rivet close to the edge provides 46% more power in cutting and grip
Blade length1'' (2.5 cm)
Total length7'' (19.7 cm)
Jaw dimensionsLength: 1 '' (2.5 cm) / Width: 0.969 '' (2.5 cm) / Depth: 0.5 '' (1.3 cm)

Downloads

Klein Tools - Manuales y Fichas Técnicas
pdf
Klein Tools - D220-7-INS - Datasheet
(Size: 102.2 KB)

 

sku Summary Unit Price Qty
D220-7-INS

D220-7-INS
Series: D220-7-INS
Tip type: Diagonal
Insulation class: Up to 1000 V
Material: Induction hardened steel
Lenght: 197 mm
Jaw dimensions: H25 x W25 x L13 mm

 COP479,094
reset

* Required Fields


Products

Purchases

Users

Attention line

Call Us: +601 344 48 88

3187441829

[email protected]

Street 16 No. 12 - 56, Bogotá DC.

Follow us

Help Us to Keep Magento Healthy - Report All Bugs (ver. 1.9.2.2)

© 2024. ELÉCTRICAS BOGOTÁ - All rights reserved- Partial or total reproduction prohibited. - Development by TGA Software